The inverter inverts the DC to AC for the load power supplying; and automatic control the start-stop of Grid charger if needed. the best to use the solar energy and the continuopus demand of electricity. It is preferred solution to solve the public grid or less developed areas residents daily electricity.
♦High transformation efficiency, low self-consumption, energy conservation;
♦Key parts mainly adopt international well-known brands, ensure security and reliability;
♦Independent patent technology MPPT control algorithm, Max MPPT tracking efficiency ≥ 99%;
♦Wide array input voltage range and power input voltage range;
♦Well user experience, user-friendly man-mechine interface, easy to operate;
♦Support RS485 communication, remote monitoring;
♦Assembler inverter and MPPT controller together
♦New generation of ring transformer which is energy-saving and high-efficiency
♦Intelligenct air colling design
♦The design of dual chip cooperative control
♦Hidden processing design of PV input port and AC input/output port
♦Unattendent and maintenance-free design
♦The design of circuit board resistant to poor environment
MPPT PV controller
Inverter
Charger
When the battery is lower than the rated value, the inverter will automatically switch on(photovoltaic/mains) the power supply and start charging the battery. When the battery is fully charged to the rated voltage, the battery will be given the priority to supply power. Photovoltaic will continue to charge/float the battery and the mains will stop charging the battery.
The priority is to use mains power supply. When the mains power does not work, it will automatically switch on the battery power supply. Moreover, when the mains power is restored, it will automatically switch to mains power supply and charge the battery at the same time.
No matter what mode of the machine is in, the energy saving mode can be turned on or off individually. After the energy saving mode turned on, the output function will be automatically turned off when the inverter has no load. Moreover, only keeps the inverter running at the energy-saving mode of low power consumption. After adding the load, the inverter will turn off the energy saving mode and resume the normal level of load output.
If you need the inverters with MPPT and charger which power are higher, please contact us, we will meet all your needs for the products.
High efficiency and energy saving, let more people enjoy the green energy.
Type(unit) | SuninvM MPPT 2K 24V |
SuninvM MPPT 3K 24V |
SuninvM MPPT 4K 24V |
SuninvM MPPT 5K 48V |
SuninvM MPPT 6K 48V |
|
Rated capacity(KVA) | 2 | 3 | 4 | 5 | 6 | |
Rated power | 2000W | 3000W | 4000W | 5000W | 6000W | |
MPPT Inverter | 24V/48V 30A | |||||
MPPT voltage input range | MPPT: 50 - 150V | |||||
Grid Input | Voltage range(Vac) | AC165-275V AC85-135V | ||||
Frequency(Hz) | 50Hz | 60Hz | 60Hz | 60Hz | 60Hz | |
Rated charge current(A) | MAX. 30A | |||||
Output | Rated output voltage(V) | 110/115/120V 220/230/240V | ||||
Rated output frequency(Hz) | 50/60±1% | |||||
Output power factor | ≥0.8 | |||||
THD | <3% | |||||
Output wave | Sine wave | |||||
Output phase | Single phase | |||||
Peak factor | 3:1 | |||||
Barrtery | Species | Optional | ||||
Battery rated voltage(V) | DC24 | DC24 | DC24 | DC48 | DC48 | |
Recharging current | 0-30A(Optional) | |||||
Others | Efficiency | ≥85% | ||||
Dynamic response | 5%(load from 0 to 100%) | |||||
Noise level | ≥40dB (1m distance) | |||||
Display interface | Digital display | |||||
Communication interface | USB | |||||
Environmental Temperature(℃) | -30+55 | |||||
Environmental Humidity | 10%-90%(non condensing) | |||||
Protection level | IP21 | |||||
Protection function | Array/ Over voltage/ Over current/ Short circuit/ Reverse connection ect protection function | |||||
Altitude(m) | ≤2000(above 1000m need according GB/T 3859.2 to derate operating) | |||||
Dimensions(mm) | 560x360x260 | 560x360x260 | 560x360x260 | 560x360x260 | 560x360x260 | |
Weight (kg) | 22.5 | 27 | 27.5 | 32.5 | 32.5 |
Package & Shipping
Batteries have high requirements for transportation.
For questions about sea transportation, air transportation and road transportation, please consult us.
Multifit Office-Our Company
HQ located in Beijing, China and founded in 2009 Our factory located in 3/F,JieSi Bldg.,6 Keji West Road,Hi-Tech Zone,Shantou,Guangdong,China.
Beijing Multifit Electrical Technology Co.. Ltd. is a high-tech plant for the solar power and renewable energy reseach, production, sales and construction of photovoltaic power station. We are located in the Chinese capital, the center of the Beijing Economic and Technological Development Zone areas-a beautiful high-tech Frtune of 500 companies Industry park.
vmaxapower brand products, worthy of my trust
I am willing to be a new partner
Customer feedback is very good product
We are long-term partners
Pleasant cooperation
Long-term business
quality assurance
We will do better
Dixere certis. Uno praebebat. Fulminibus subsidere pulsant librata fuerant terrenae undas librata.
Homini locavit fluminaque calidis metusque. Fuit haec madescit
smiling service
Do things with integrity
Photovoltaic leader
One-stop service
Brand export to the world
Domestic and foreign exhibitions hot-selling brand