As a new cleaning energy, solar power generation is developing rapidly all over the world.Solar power stations are often built on high ground where there is plenty of sun, but sand and water are scarce. So it’s easy for dust and dirt to accumulate on solar panels. And if this dust and dirt is not dealt with promptly, it will seriously affect the efficiency of solar panels to generate electricity, by about 8 to 30 percent. The hot spot problem of solar panels caused by dust also greatly reduces the service life of solar panels.
1. When there is only a small amount of dust on the solar panel, you can use the solar panel cleaning robot or solar panel cleaning brush in dry cleaning mode to clean the solar panel.
2. When there is a lot of sand and dust on the solar panel, you can choose to connect the water pipe for washing.
When you finish using the cleaning brush, check and clean the accessories in time!
The bristles need to be cleaned with a special brush cleaning agent to clean the dirt left on the top such as dust, bird droppings, etc., and then rinse with clean water and dry to prevent mold.
2. Clean water droplets on the wire connecting to the cleaning brush to prevent electricity leakage. Dry the water pipe and put it away for next use.
3. Regularly check the wear of spare parts, such as the motor in the brush plate. Generally, after a long period of use, the cleaning speed of the brush will slow down, which is caused by the wear of the motor.
Daily maintenance is essential, as is regular inspections, which can lead to a longer service life of semi-automatic cleaning brush.
For more information on solar products, please contact the sales department of Guangdong Multifit Solar Co., Ltd.
We sincerely invite national agents and distributors!
Sunshine For You Multifit To All!
Post time: Nov-15-2022