People need not only low-voltage direct current supplied by the battery, but also 220v/110v alternating current which is indispensable to us in the daily life.the inverter can meet such needs.It converts the DC to AC for the load power supplying, which makes it completely convinient to ues electricity.
♦High transformation efficiency, low self-consumption, energy conservation;
♦Key accessories almost use international trustworthy brands, which are high-quality and reliable;
♦Intelligent air cooling design, Effective solution to the system cooling, improve the efficiency of the system;
♦Large fluctuations in input and output voltage are acceptable;
♦With independent patent technology to run and control automatically;
♦Support RS485 communication, remote monitoring;
♦Built-in MPPT PV controller, The MPPT PV controller is more than 30% higher than the traditional PWM PV controller.
♦The use of the toroidal transformer makes it more energy-saving and high-efficiency.
♦Intelligent air cooling design
♦The design of dual chip cooperative control
♦Hidden processing design of PV input port and AC input/output port, Pay more attention to safety.
♦One setup, no worries
♦It is quit suitable for poor conditions, has great adaptability.
1.Compared with PWM, the charging efficiency is increased by at least 20-30%
2.There is almost no current loss
3.It still has excellent performance when the solar energy is low
4.It can prolong the life of the battery
5.Fully protected against most system errors and shortcomings
1.Compared with PWM, the charging efficiency is increased by at least 20-30%
2.There is almost no current loss
3.It still has excellent performance when the solar energy is low
4.It can prolong the life of the battery
5.Fully protected against most system errors and shortcomings
1.High conversion efficiency
2.Small size and light weight
3.Less magnetic interference, low noise, low operation temperature
4.Weak battery radiation
5.Especially easy for quick installation and disassembly in electronic equipment
When the battery is lower than the rated value, the inverter will automatically switch on(photovoltaic/mains) the power supply and start charging the battery. When the battery is fully charged to the rated voltage, the battery will be given the priority to supply power. Photovoltaic will continue to charge/float the battery and the mains will stop charging the battery.
The priority is to use mains power supply. When the mains power does not work, it will automatically switch on the battery power supply. Moreover, when the mains power is restored, it will automatically switch to mains power supply and charge the battery at the same time.
No matter what mode of the machine is in, the energy saving mode can be turned on or off individually. After the energy saving mode turned on, the output function will be automatically turned off when the inverter has no load. Moreover, only keeps the inverter running at the energy-saving mode of low power consumption. After adding the load, the inverter will turn off the energy saving mode and resume the normal level of load output.
If you need the inverters with MPPT and charger which power are higher, please contact us, we will meet all your needs for the products.
Type(unit) | SuninvM MPPT 2K 24V |
SuninvM MPPT 3K 24V |
SuninvM MPPT 4K 24V |
SuninvM MPPT 5K 48V |
SuninvM MPPT 6K 48V |
|
Rated capacity(KVA) | 2 | 3 | 4 | 5 | 6 | |
Rated power | 2000W | 3000W | 4000W | 5000W | 6000W | |
MPPT Inverter | 24V/48V 30A | |||||
MPPT voltage input range | MPPT: 50 - 150V | |||||
Grid Input | Voltage range(Vac) | AC165-275V AC85-135V | ||||
Frequency(Hz) | 50Hz | 60Hz | 60Hz | 60Hz | 60Hz | |
Rated charge current(A) | MAX. 30A | |||||
Output | Rated output voltage(V) | 110/115/120V 220/230/240V | ||||
Rated output frequency(Hz) | 50/60±1% | |||||
Output power factor | ≥0.8 | |||||
THD | <3% | |||||
Output wave | Sine wave | |||||
Output phase | Single phase | |||||
Peak factor | 3:1 | |||||
Barrtery | Species | Optional | ||||
Battery rated voltage(V) | DC24 | DC24 | DC24 | DC48 | DC48 | |
Recharging current | 0-30A(Optional) | |||||
Others | Efficiency | ≥85% | ||||
Dynamic response | 5%(load from 0 to 100%) | |||||
Noise level | ≥40dB (1m distance) | |||||
Display interface | Digital display | |||||
Communication interface | USB | |||||
Environmental Temperature(℃) | -30+55 | |||||
Environmental Humidity | 10%-90%(non condensing) | |||||
Protection level | IP21 | |||||
Protection function | Array/ Over voltage/ Over current/ Short circuit/ Reverse connection ect protection function | |||||
Altitude(m) | ≤2000(above 1000m need according GB/T 3859.2 to derate operating) | |||||
Dimensions(mm) | 560x360x260 | 560x360x260 | 560x360x260 | 560x360x260 | 560x360x260 | |
Weight (kg) | 22.5 | 27 | 27.5 | 32.5 | 32.5 |
Package & Shipping
Batteries have high requirements for transportation.
For questions about sea transportation, air transportation and road transportation, please consult us.
Multifit Office-Our Company
HQ located in Beijing, China and founded in 2009 Our factory located in 3/F,JieSi Bldg.,6 Keji West Road,Hi-Tech Zone,Shantou,Guangdong,China.
vmaxapower brand products, worthy of my trust
I am willing to be a new partner
Customer feedback is very good product
We are long-term partners
Pleasant cooperation
Long-term business
quality assurance
We will do better
Dixere certis. Uno praebebat. Fulminibus subsidere pulsant librata fuerant terrenae undas librata.
Homini locavit fluminaque calidis metusque. Fuit haec madescit
smiling service
Do things with integrity
Photovoltaic leader
One-stop service
Brand export to the world
Domestic and foreign exhibitions hot-selling brand